- Forged body and claw. Excellent Strength.
- Hole on head for processing is closed. Ratchet drive stay smooth.
- 2 rings (φ4.5mm) for safety code.
- Paint finishing in Blue. Easy to identify this item.
Material：Cr-V
| Item No. | JAN code | Price（￥） | Range of Use（mm） | Length（mm） | Weight（ｇ） | Inner Box |
|---|---|---|---|---|---|---|
| RM-10×12L | 386014 | 7,050 | 10・12 | 235 | 220 | 6cs |
| RM-10×13L | 386106 | 7,050 | 10・13 | 235 | 220 | 6pcs |
| RM-10×14L | 386281 | 7,050 | 10・14 | 235 | 220 | 6pcs |
| RM-11×13L | 386366 | 7,050 | 11・13 | 235 | 220 | 6pcs |
| RM-12×14L | 386441 | 7,050 | 12・14 | 235 | 220 | 6pcs |
| RM-13×14L | 386878 | 7,650 | 13・14 | 235 | 220 | 6pcs |
| RM-14×15L | 386526 | 7,650 | 14・15 | 278 | 290 | 6pcs |
| RM-13×17L | 386601 | 7,750 | 13・17 | 278 | 290 | 6pcs |
| RM-14×17L | 386793 | 7,750 | 14・17 | 278 | 290 | 6pcs |
| RM-17×19L | 387097 | 8,850 | 17・19 | 312 | 495 | 6pcs |
| RM-17×21L | 386953 | 8,850 | 17・21 | 312 | 495 | 6pcs |
| RM-19×21L | 387172 | 9,250 | 19・21 | 312 | 495 | 6pcs |
| RM-19×24L | 387257 | 10,800 | 19・24 | 311 | 495 | 6pcs |
| Item No. | Head outside diameter（mm） | Socket outside diameter（mm） | Head thickness（mm） | Socket length ℓ（mm） | Torque N・m | |||
|---|---|---|---|---|---|---|---|---|
| D | smaller | bigger | T | smaller | bigger | smaller | bigger | |
| RM-10×12L | 30.5 | 14.0 | 16.5 | 15.5 | 27.0 | 27.0 | 78.5 | 78.5 |
| RM-10×13L | 30.5 | 14.0 | 18.0 | 15.5 | 27.0 | 27.0 | 78.5 | 94.1 |
| RM-10×14L | 30.5 | 14.0 | 19.0 | 15.5 | 27.0 | 27.0 | 78.5 | 105.9 |
| RM-11×13L | 30.5 | 15.2 | 18.0 | 15.5 | 27.0 | 27.0 | 78.5 | 94.1 |
| RM-12×14L | 30.5 | 16.4 | 19.0 | 15.5 | 27.0 | 27.0 | 78.5 | 105.9 |
| RM-13×14L | 30.5 | 18.0 | 19.0 | 15.5 | 27.0 | 27.0 | 94.1 | 105.9 |
| RM-14×15L | 35.0 | 19.0 | 20.0 | 16.0 | 26.5 | 26.5 | 141.2 | 164.8 |
| RM-13×17L | 35.0 | 18.0 | 23.0 | 16.0 | 26.5 | 26.5 | 125.5 | 180.4 |
| RM-14×17L | 35.0 | 19.0 | 23.0 | 16.0 | 26.5 | 26.5 | 141.2 | 180.4 |
| RM-17×19L | 41.0 | 23.5 | 26.0 | 18.0 | 28.5 | 28.5 | 247.1 | 294.2 |
| RM-17×21L | 41.0 | 23.5 | 28.5 | 18.0 | 28.5 | 28.5 | 247.1 | 341.3 |
| RM-19×21L | 41.0 | 26.0 | 28.5 | 18.0 | 28.5 | 28.5 | 294.2 | 341.3 |
| RM-19×24L | 44.0 | 27.0 | 33.5 | 18.0 | 40.0 | 40.0 | 294.2 | 411.9 |
※JAN Codes are shown by 6 digits numbers, which removed maker code (4975180).
※Price is for each unit.
Item No. RM-10×12L RM-10×13L RM-10×14L RM-11×13L RM-12×14L RM-13×14L RM-13×17L RM-14×15L RM-14×17L RM-17×19L RM-17×21L RM-19×21L RM-19×24LRM-10x12L RM-10x13L RM-10x14L RM-11x13L RM-12x14L RM-13x14L RM-13x17L RM-14x15L RM-14x17L RM-17x19L RM-17x21L RM-19x21L RM-19x24L
-
12 points (round corners)12 points (round corners) sockets are easier to insert nut. This surface fit design prevents damaging of bolts or nuts.
Use
- Suitable for duct piping work.
- For tightening steel frame connecting bolt such as for h-section steel.
Caution
- Please adjust to width across flats of bolt/nut.
- Do NOT insert pipes to handle.
- Do NOT use as a hammer.
- Connect safety code for fall prevention when you use at height.
- Do NOT use as any other purposes than as hand tool.
